The Gain control is used to compensate for the amount of compression and brings the signal to the required output level as displayed by the output bargraph meter. the MX30 Pro handles all compression levels with ease and displays the amount of compression on a high resolution Gain Reduction bargraph meter.

Large transients are controlled instantly whilst small signal variations are treated gently, retaining as much ‘life’ as possible and without generating unpredictable side effects. The gate is followed by a variable Threshold, variable Ratio, soft knee compressor with fully automatic Attack and Release. The 'Slow' mode is more suitable for vocals and instruments with longer decay times or can be used to smooth over rough fade outs. The 'Fast' mode can be used for instruments with rapid decay times or for additional tightening of the gating effect. Switching is provided for 'Fast' or 'Slow' release characteristics. This design approach also retains all ‘leading edge’ information making the gate ideal for ‘cleaning up’ vocals or retaining the ‘punch’ on gated drums. Two LEDs show when the signal is ‘above’ or ‘below’ Threshold and a push button switch allows additional control of Release time.

Although quick and simple to operate, the gate’s auto-circuitry continually optimises such parameters as Attack, Hold, Ratio and Release, completely eliminating ‘chatter’ when the signal is fluctuating on or around Threshold. Used to remove unwanted noise below a pre-set level, each channel consists of a variable Threshold Gate incorporating Drawmer’s ‘Programme Adaptive’ circuitry. Operational control is split into three sections:- Gate, Compressor, Output: As a result the inexperienced user gains the benefits of Drawmer quality and performance, combined with lower cost and simplicity of operation. Aimed at the musician, project studio and live performer, who is determined not to compromise on quality, but have to work to a tighter budget.īy using circuit elements drawn from existing top-of-the-line Drawmer products and by simplifying the control systems where possible, the MX Pro range is no less sophisticated than our other units, despite the price tag. Drawing on our many years experience in professional audio we have developed a series of lower-cost Drawmer dynamic signal processors, the MX Pro range. The MX30 Pro Gated/Comp/Limiter is a low cost professional quality dynamics processor. 1970 Dual FET Compressor and Pre-Amplifier.1978 Stereo Tone shaping FET Compressor.D-Clock-R Dual Redundant Clock Distribution Amplifier.

D-Clock Clock Measurement & Distribution.

1978 Stereo Tone Shaping FET Compressor.

1976 Stereo 3 Band Saturation and Width Processor.

1970 Dual FET Compressor and Preamplifier.

Drawmer mx30 mix out